De allereerste stap die gemaakt moet worden voor het koppelen met de VO365 omgeving is het maken van een VPN verbinding tussen uw netwerk en dat van VO365. Dit kan gedaan worden door middel van twee technieken. In tabel 1-1 ziet u deze beschreven.
...
Deze techniek is bij VO365 opgezet in een RRAS server. Hierbij is de verbinding niet redundant uitgevoerd. Status colour Red title UITGEFASEERD
Vereisten netwerk
...
The very first step that must be made for linking to the VO365 environment is to create a VPN connection between your network and that of VO365. This can be done through two techniques. These are described in Table 1-1.
| Technic | Description |
|---|---|
| IPsec | The most secure method to make a connection between two networks. This technique is supported by most firewall software. This technique has been carried out redundantly at VO365. |
|
Network requirements
- The routes to reach the internal DCs to connect the user sources must NOT be explicitly used for the clients. SoftApp distribution does not support traffic across the tunnel outside the traffic coming from the ADs . The clients on your subnet can not have routes to 192.168.184.0/24.
...
- If this is the case, calls can not be made or screen sharing is not possible. This problem arises because a VIA of internal servers is included in the SIP messages. The client will see that this route exists and try to route the traffic over it. Therefore make sure that the route over the VPN is only available for the internal servers.